TOPIC
DISCUSSION ADB connector signal assignments -------------------------------- Pin number Signal name Description 1 ADB Bidirectional data bus for I/O 2 /POWER ON Key on ADB keyboard grounds this pin-to-pin 4 to turn on power supply 3 +5V +5 V power. 4 GND Ground Serial port connector signal assignments ---------------------------------------- Pin Signal name Description 1 HSKo Handshake output. Connected to the Request to Send (RTS) pin on the Combo chip. Tristated when the Data Terminal Ready (DTR) signal is inactive. 2 HSKi Handshake input. Connected to the Transmit Receive Clock (TRXC) pin on the Combo chip. 3 /TXD Transmit data (inverted). Connected to the Transmit Data (TXD) pin on the Combo chip. Tristated when DTR is inactive 4 SG Signal ground. Connected to logic and chassis ground. 5 /RXD Receive data (inverted). Connected to the Receive Data (RXD) pin on the Combo chip. 6 TXD Transmit data. Connected to the Transmit Data (TXD) pin on the Combo chip. Tristated when DTR is inactive 7 GPi General purpose input. Connected to the Data Carrier Detect (DCD) pin on the Combo chip. 8 RXD Receive data. Connected to the Receive Data (RXD) pin on the Combo chip. 9, 10, 11 GND These pins are connected to chassis ground PowerBook Duo Floppy Adapter ---------------------------- The drive is connected through a custom HDI-20 high-density connector. Pin number Signal name Description 1, 2, 3, 4 GND Ground 5, 10, 20 nc No connection 6, 7, 8, 9 +5V +5 V power for floppy drive 11 PH0 State-control line 0 12 PH1 State-control line 1 13 PH2 State-control line 2 14 PH3 State-control line 3 15 /WRREQ Write data request 16 HDSEL Head select 17 /ENBL Floppy drive enable 18 RD Read data 19 WR Write data Article Change History: 24 Jun 1994 - Added Duo 250 and 270c. Support Information Services |
Document Information | |
Product Area: | Computers |
Category: | PowerBook |
Sub Category: | PowerBook 200 Series (Duo) |
Copyright © 2000 Apple Computer, Inc. All rights reserved.