TITLE
    Color LaserWriter 12/600 PS: Fuser Oil Pump Error
Article ID:
Created:
Modified:
17969
6/16/95
5/21/98

TOPIC

    I just moved my Color LaserWriter 12/600 PS to a new location and now the status panel is showing an error that the Read Me file identifies as a fuser oil pump error (the paper-jam and paper-out lights flash, the yellow toner light illuminates, and one maintenance light is on). What happened?


DISCUSSION

    The oil may not have been properly extracted from the fuser before you moved the printer. If oil is present in a printer that is being moved and tilted, the oil overflow sensor can become contaminated, which will cause the oil pump error you describe. When the fuser oil pump error occurs, servicing is required.

    Before moving your Color LaserWriter 12/600 PS follow the extraction procedures found in Appendix E of the user's guide.
    This information is also applicable to the Color LaserWriter 12/660 PS printer.

    This article was published in the "Information Alley":
    Volume II, Issue 5, Page 8

Document Information
Product Area: Printers
Category: LaserWriters
Sub Category: Color LaserWriter 12/600 PS

Copyright © 2000 Apple Computer, Inc. All rights reserved.