This article is the Open Transport Read Me file.

Name: Open Transport 1.0.7 Patch
Version: n/a
Released: August 21, 1995
Description: This application updates Open Transport from version 1.0.6 to version 1.0.7. Please see below for further information.

The enclosed file is a self-extracting archive. To use, download, double-click the downloaded file (this decompresses it).


From the "Open Transport 1.0.7 Patch Read Me"

What is this patch?
The Open Transport 1.0.7 patch consists of a patching application called Open Tpt 1.0.6 -> 1.0.7 Patcher, a new TCP/IP Control Panel, and this Read Me file.

Open Tpt 1.0.6 -> 1.0.7 Patcher is a self-contained application that provides an update to the Open Transport software already installed on your system. To use this update application you must have Mac OS version 7.5.2 installed on your computer, and you must have Open Transport version 1.0.6 already installed on your system.

When successfully completed, the Open Transport Internet Library and the TCP/IP control panel will have been updated to Open Transport version 1.0.7. All other components of Open Transport will remain at version 1.0.6.

Who needs this patch?
This update is recommended for all Power Macintosh systems with the PCI bus, including the Power Macintosh 7200, 7500, 8500, and 9500. It will be especially valuable if you use SLIP or PPP to access the Internet or other TCP/IP resources.

This update CANNOT be used with any beta or test versions of Open Transport, or on the Power Macintosh 6100, 7100, 8100, or 680x0-based Macintosh computers.

How do I use this patch?

1. Copy Open Tpt 1.0.6 -> 1.0.7 Patcher and the TCP/IP control panel to your desktop.

2. Choose Restart from the Special menu. While your computer starts up, hold down the Shift key (to turn off any extensions).

3. Drag the TCP/IP control panel to the icon of your System Folder (not to the open System Folder window). In the dialog box that appears, click OK. Another dialog box opens, asking if you want to replace the older version of the control panel. Click OK to copy the new TCP/IP control panel to the Control Panels folder inside your System Folder.

4. Double-click the Open Tpt 1.0.6 -> 1.0.7 Patcher icon to open it.

5. Read the information in the dialog box that appears.

6. Click the Patch button.

7. In the dialog box that appears, select your Open Tpt Internet Library in your Extensions folder (inside the System Folder on your startup disk). Then click the Patch button.

8. A message appears telling you the patch was successful.

9. Choose Restart from the Special menu. Allow your computer to start up normally, without holding down the Shift key.

10. Drag the "Open Tpt 1.0.6 -> 1.0.7 Patcher" from the desktop to the trash and empty it.

In general, it is recommended that these fields be left blank when using SLIP or PPP unless your network manager has specified otherwise. If you do manually configure these items, you must enter a Subnet Mask that places your Router's IP address and your own assigned IP address on the same subnet. If these two addresses are on different subnets, you won't be able to send data to remote hosts.

* Improved SLIP or PPP*Performance

SLIP or PPP throughput performance has been improved by changing the interrupt level at which inbound SLIP or PPP data is processed.

* Networks with more than 256 zones

The TCP/IP control panel now works correctly with networks having more than 256 zones. Previous versions of the control panel sometimes crashed when selecting a zone on a network with more than 256 zones.


Question:
I have a Power Mac 9500 with an earlier version of Open Transport software. How do I get a copy of Open Transport version 1.0.6 so that I can use this patch?

Answer:
Users who previously bought a Power Macintosh 9500 can get upgrade information from the Apple Software Updates web site at http://www.apple.com/swupdates .