TOPIC
I am using a television as my monitor for my Power Macintosh 8500. I set the screen resolution to 256x192 and now when I try to reopen the Sound & Displays Control Panel, I get a message saying that the screen is too small to display this window and it closes. I tried resetting the parameter RAM (PRAM), but the small resolution remains. How can I set my monitor resolution back to normal when I cannot access the Sound & Displays control panel?
DISCUSSION When the Power Macintosh 8500 is using a television as its only display, The Sound & Displays control panel offers screen resolution options of 640 x 480, 512 x 384, 320 x 240, and 256 x 192. At the 256 x 192 resolution, you are not able to reopen the Sound & Displays control panel to return to a larger screen size. Resetting the PRAM will not return the resolution to a standard setting either. The way to set your monitor back to a larger screen size is to use the Control Strip software that comes with the Power Macintosh 8500. Use the Resolution Control Strip module (the second module from the left) to switch to a larger screen resolution. If you have removed the Control Strip software or cannot see the Control Strip, you can follow these steps to reset the display settings:
2. After the second startup sound, release all of the keys and startup with the extensions off by holding down the Shift key until you see the message that says "Welcome to Macintosh Extensions Off". Then you can release the Shift key. 3. Once the computer has started up, go to the Preferences Folder, which is inside the System Folder, and throw away the Display Preferences file. |
Document Information | |
Product Area: | Computers |
Category: | Power Macintosh |
Sub Category: | Power Macintosh 8500 |
Keywords: | kpci, hts |
Copyright © 2000 Apple Computer, Inc. All rights reserved.