TITLE
    AppleVision 1710AV: Proper Setup for Microphone (12/95)
Article ID:
Created:
Modified: 		19019
12/5/95
12/5/95
TOPIC


    How can I properly set up the microphone on my AppleVision 1710AV Display?

DISCUSSION


    To verify that the AppleVision 1710AV Display is properly set up, follow these steps:

    Step 1
    ------
    Make sure that the audio cables are plugged into the correct places on the computer. An easy way to check this is to verify that the icon on the cable matches the icon on the computer's port.

    Step 2
    ------
    Use Macintosh Guide to properly set up the software. The setup varies depending on which computer the display is connected to.

    Step 3
    ------
    Set the microphone to the highest quality sample rate (44 kHz) and bit depth (16-bit).


    Support Information Services

Document Information
Product Area: Monitors-Displays
Category: Multiple Scan Displays
Sub Category: AppleVision 1710AV

Copyright © 2000 Apple Computer, Inc. All rights reserved.