TOPIC
DISCUSSION lomega ZIP drive and the PC Exchange control panel -------------------------------------------------- The reason you cannot see the ZIP drive in the PC Exchange control panel is because PC Exchange has an internal list of supported devices and the ZIP drive is not on the list. The ZIP drive will probably not be added to this list because the driver that ships with the drive is PC Exchange aware. DOS formatted ZIP cartridges can be used with the driver that ships with the drive. You need to run the installer which puts the Iomega Driver extension in the extensions folder. Restart the Macintosh, insert a DOS formatted ZIP cartridge, and it appears on the desktop. The cartridge may need to be formatted using SCSIUTIL.EXE that ships with the ZIP drive. There is no need to configure PC Exchange to mount the cartridge, however, PC Exchange, Access PC, or DOS Mounter must also be installed on the Macintosh. Cannot see all of the files or folders on the drive --------------------------------------------------- Below are two issues we are aware of that may be causing this: Ñ PC Exchange (2.0.x) has a limit of displaying 512 files in a subdirectory. Ñ This sounds similar to an issue with CD-ROM discs. All of the files and folders could not be seen on a CD-ROM when Connectix Corporation's RAM Doubler 1.5.1 is installed, and file sharing is turned on. This incompatibility was fixed in RAM Doubler 1.5.2 or later. You should upgrade RAM Doubler, if RAM Doubler is being used. |
Document Information | |
Product Area: | Apple Software |
Category: | Utility Software |
Sub Category: | Macintosh PC Exchange |
Copyright © 2000 Apple Computer, Inc. All rights reserved.