TITLE
    ImageWriter II: Factory-set Switch Settings (5/97)
Article ID:
Created:
Modified: 		21231
5/1/97
5/16/97
TOPIC


    I have an ImageWriter II printer. What are the default switch settings are for the printer, that is, what are the "factory-set" switch settings for a new ImageWriter II?

DISCUSSION


    The table below shows the default, factory-set, switch settings for an ImageWriter II printer.

    Note that these switch settings are the same whether the printer is used with an Apple II family computer or a Macintosh computer.

    Switch Bank One
    ---------------
    1-1 = Open
    1-2 = Open
    1-3 = Open
    1-4 = Open
    1-5 = Open
    1-6 = Closed
    1-7 = Open
    1-8 = Open


    Switch Bank Two
    ---------------
    2-1 = Closed
    2-2 = Closed
    2-3 = Open
    2-4 = Open
    2-5 = Factory Set Hammer Timing (do not change this one)
    2-6 = Factory Set Hammer Timing (do not change this one)


    Notes
    =====
    Open = Off
    Closed = On

    Refer to the article titled "ImageWriter II: Pinouts & Switch Settings" TECHINFO 0001301 for switch descriptions and information on their functions.


    This article was published in the 2 May 1997 "Information Alley".


    Article Change History:
    05 May 1997 - Added Info Alley statement.



Document Information
Product Area: Printers
Category: ImageWriters
Sub Category: ImageWriter II and II/L

Copyright © 2000 Apple Computer, Inc. All rights reserved.