TOPIC
I have a Muliple Scan 720 Display connected to a Power Macintosh 9600. When I select the Monitors and Sounds control panel I am only able to select from three resolutions. The video card in my Power Macintosh 9600 supports all of the factory preset resolutions for the Multiple Scan 720. Is there a problem with my display?
DISCUSSION The Multiple Scan 720 supports DDC (Data Display Channel) which is not supported on most Macintosh computers. By default, this control is set to "Off". However, if you have a Power Macintosh 9600 computer, a Power Macintosh G3 Tower, Desktop, or All-In-One, an IBM PC-compatible computer, or if you have a graphics card installed in your computer that supports DDC, additional resolution settings may be available by selecting a different setting. To select a setting, turn the Select/Adjust knob to highlight one of the following options: 2B, 1/2B, or 2AB. Then press the Enter button. This information is located in the Multiple Scan 720 User's Manual on page 27 under "Information: Mode, Absence, DDC". |
| Document Information | |
| Product Area: | Monitors-Displays |
| Category: | Multiple Scan Displays |
| Sub Category: | Multiple Scan 720 Display |
Copyright © 2000 Apple Computer, Inc. All rights reserved.