This article describes how to print envelopes with Microsoft Word 6.0.1 for Macintosh.

Note: The contents of this article come from the Microsoft web site. Apple is not responsible for its content.

To print a single envelope from Microsoft Word 6.0.1 for Macintosh, you need to:

• Ensure that you are using the appropriate driver.
• Set the necessary advanced settings (to see whether you need to adjust advanced settings, see the table in this document).
• Create and print the envelopes.

1. On the Apple menu, click Chooser.
2. Select the appropriate printer driver for your printer and select the appropriate printer name or port selection.
3. If you are using a non-PostScript printer, skip to step 6. If you are using a PostScript printer, click the Setup button to select the appropriate PostScript Printer Description (PPD) File.
4. In the Select a PPD dialog box, click Select PPD, and select the PPD for your printer.
5. Click the Configure button and configure the option for your printer. (These options are listed in the table in this document.)
6. Close the Chooser.

1. On the TOOLS menu, click MACRO.
2. Under MACROS AVAILABLE IN, click WORD COMMANDS.
3. Select TOOLSADVANCEDSETTINGS, and click RUN.
4. In the CATEGORIES list, select the printer driver that you are currently using.
5. In the OPTION box, type FLAGS.
6. In the SETTING box, type 4.
7. Click SET and then click OK.
8. Restart Word for the changes to take effect.

1. On the TOOLS menu, click ENVELOPES AND LABELS.
2. Select the ENVELOPES tab, and enter the delivery and return addresses.
3. Click FEED (in the lower-right corner) and set the appropriate settings from the table. Click OK.
4. Click PRINT.
5. If you need to set and advance setting, set the appropriate settings in the Page Setup dialog box (consult the table to see if you need to do this.) Click OK.
6. Select the appropriate PAPER SOURCE option (from the table.) Click PRINT.