|
|
|||
TITLE
|
|
||
TOPIC
This article contains the Read Me document for the Mac OS X SCSI Card Updater, with a link to the software download.
DISCUSSION
- Power Macintosh G3 (beige) or Macintosh Server G3 (beige)
- Apple Ultra Wide SCSI PCI card
| Language/OS Required | Release Date | Version | Read Me | Software |
|
North American English
This updater runs under Mac OS 9, and enables the installation of Mac OS X Server 1.x or Mac OS X 10.0 |
2000-09-15 | --- |
|
274 K |
North American English
About the Mac OS X 10.0 SCSI Card Update
This Read Me includes information about the Mac OS X 10.0 SCSI Card Update.
Why should I install this update?
This update places new firmware on your Apple Ultra Wide SCSI PCI card. This new firmware is required if you wish to install Mac OS X 10.0 or Mac OS X Server 1.x on a drive connected to this card.
System requirements
To determine whether this update is appropriate for your SCSI card, open Apple System Profiler. In the Devices and Volumes section, click the disclosure triangle next to your SCSI card. This updater is for the following card:
Card name: Apple53C875Card
Note: If you see:
Card Revision: 4
120
your firmware is already up to date, and you do not need to use this update.
Installing the Mac OS X SCSI Card Update
1. Double-click the Mac OS X 10.0 SCSI Card Update icon.
2. Make sure the Update box is checked next to the card named 'Apple53C875Card'.
Note: If you receive the message "You do not have any flashable cards installed," you do not need to use this update. If you have a different Apple SCSI card, you may need to install a different update. You can look for other SCSI card firmware updates at http://www.apple.com/swupdates .
3. Click the Flash button. There will be no response for a few seconds, but when the process is finished you should receive a message that the update was successful.
4. Quit the updater and restart your computer.