|
|
|||
TITLE
|
|
||
TOPIC
This article provides PowerBook G3 Series computer (M4753) packing instructions.
DISCUSSION
These are the directions for using the recyclable Vistaflex Cushion packing material that comes with your PowerBook G3 Series computer.
| 1. Place the Vistaflex cushion on a flat surface in front of you. Make sure the "Key" is positioned to your left and the "Lock" to your right. | 2. Place the PowerBook G3 Series Computer on the cushion with the front of the computer facing you. |
| 3. Lift the cushion slightly by the Key and Lock to nestle the PowerBook in the Corner Cradles. (You may need to reposition the PowerBook manually to fit in each corner of the cradle. | 4. With the fingers of your right hand, reach through the Lock and Grab the Key. Pull the Key through the Lock, as shown. |
| 5. Locate the corner flaps on the Vistaflex cushion. Position them, as shown above, to protect the corners of the PowerBook G3 Series Computer. | 6. When you're done, the PowerBook G3 Series computer and cushion should look like this. |