TITLE
    Power Macintosh 6500 or G3 w/56K Modem: AT Command Reference Location
Article ID:
Created:
Modified: 		30208
10/17/97
6/25/99
TOPIC

    I have a Power Macintosh 6500 series computer that came with an Apple/GV internal 56Kbps modem. I need to set a custom initialization string, but cannot find one. What should I do?

DISCUSSION

    The AT command reference for your Power Macintosh 6500 56Kbps modem is located on your hard disk in:

    Hard Disk:Applications:FaxSTF:ATCom56flex(apple).pdf

    It is located on the Restore CD in:

    Restore CD:Macintosh HD Files:Applications:FaxSTF:ATCom56flex(apple).pdf

    The AT command reference for the 56Kbps modem in a Power Macintosh G3 can be found on the Modem Software CD in the Modem Scripts folder.

    Note:
    Apple cannot provide guidance on the selection of specific modem initialization strings or modem commands. The initialization strings that you use are a function of the type of modem you are calling. Most modems simply require a factory reset (AT&F1 in this case) to enable or reset the basic features of the modem. The selection of such commands is a function of what you are trying to do; your internet service provider is normally the best source of special modem requirements.

Document Information
Product Area: Computers
Category: Power Macintosh
Sub Category: Power Macintosh 6500; Power Macintosh G3

Copyright © 2000 Apple Computer, Inc. All rights reserved.