TOPIC
I have a Multiple Scan 15AV display and with some resolutions there is slight pincushioning which I would like to be able to adjust out. Is there a user control for me to adjust this?
DISCUSSION There are two adjustments (pincushion and Trapezoid) provided by holding down buttons on the front of your Multiple Scan 15AV Display. Follow the steps below to adjust for pincushion and trapezoid. Pincushion - Hold down the "Select" and "Recall" buttons together. The first two LEDs in the panel will light up and you can adjust pincushion at this point by using the up and down arrows on the front of the display. Trapezoid - While in the mode for pincushion, push the "Select" button once and you should see the last two LEDs in the panel light up. At this point you can adjust for trapezoid by selecting the up and down arrows on the front of the display. Once these adjustments are made in any resolution, those adjustments are saved unless you select the recall button which will then set the resolution used to the factory default setting that was set prior to making those adjustments. |
||||||
| Document Information | |
| Product Area: | Monitors-Displays |
| Category: | Multiple Scan Displays |
| Sub Category: | Multiple Scan 15 Display |
Copyright © 2000 Apple Computer, Inc. All rights reserved.