TITLE
    Not Enough Power Connectors in Minitowers
Article ID:
Created:
Modified: 		36364
12/3/97
12/11/97
TOPIC

    Power Computing provided the information in this article and it was deemed accurate as of 14 November 1997. Apple Computer, Inc. is not responsible for its content. This article is being provided as is and will not be updated in the future.

    According to page 91 of the PowerCenter Pro User's Guide, regarding minitowers, it says that I can add a non-accessible hard drive in the 3.5" bay above the floppy disk drive. However, I only have two extra power connectors from the power supply so I can't use both of the 5.25" bays if do this.

DISCUSSION

    The User's Guide is correct. What is needed is a splitter or" Y-connector" (part number 6400-1012-00) on one of the power connectors and that will allow two devices to be powered from one power connector.

    Make sure the splitter is seated on completely in order for it to work properly.

    The minitower's 200-watt power supply will adequately power the additional device without deterioration of the computer's performance.

    If there is no "Y-connector" inside the computer, contact Power Computing's Technical Support and one can be mailed out.


    Machines Affected: NT (Minitowers) enclosures.

Document Information
Product Area: Computers
Category: Power Computing Corp.
Sub Category: Troubleshooting
Keywords: kpowercc

Copyright © 2000 Apple Computer, Inc. All rights reserved.