TITLE
    Miro DC30: Video not full screen or distorted
Article ID:
Created:
Modified: 		36453
12/3/97
12/8/97
TOPIC

    Power Computing provided the information in this article and it was deemed accurate as of 14 November 1997. Apple Computer, Inc. is not responsible for its content. This article is being provided as is and will not be updated in the future.

    When outputting video to an NTSC monitor, the video is not full screen, is displaying distorted, or not displaying at all.

DISCUSSION

    When capturing video, you must capture in one of the following resolutions to maintain an image that can be output reliably to an NTSC monitor. For NTSC, 640x480, 640x240, 320x240, 320x480.

    If the DC30 control panel is set to Rectangular CCIR601, you will only be able to capture 704x480 regardless of Adobe settings.

    The DC30 control panel should be set for:
    • TV Standard: NTSC
    • Best Connector: S-video/Composite (depending on connector)
    • Advanced Settings: Square
    Make sure the Make/Output Options/Output Type pull down in Premiere is set to QuickTime Movie not QuickTime Composite.

    Copyright 1997 Miro Computer Products


    Machines Affected: All

Document Information
Product Area: Computers
Category: Power Computing Corp.
Sub Category: Troubleshooting

Copyright © 2000 Apple Computer, Inc. All rights reserved.