TOPIC
This article comprises the Read Me for iMovie version 1.0.2. This software was released by Apple on 08 February 2000 and is available for download from the Apple Software Updates Web site at http://www.apple.com/swupdates .
DISCUSSION
About iMovie 1.0.2
System Requirements Getting Started Reinstalling iMovie If you inadvertently delete iMovie, you can reinstall the application. To reinstall iMovie, follow these steps:
2. If necessary, double-click the CD's icon to open it. 3. Double-click the iMovie Installer icon and follow the onscreen instructions. The application and components will be placed in a folder named iMovie on the main level of your hard disk. Note: iMovie was originally installed on your computer in the Applications folder on your hard disk. If you reinstall iMovie, the Installer puts an iMovie folder (containing the iMovie application folder and the iMovie Tutorial folder, if you chose to install this also), on the main level of your hard disk. To restore iMovie to its original location, after reinstalling iMovie, drag the iMovie folder and its contents into the Applications folder on your hard disk. Using iMovie For optimal performance File formats supported You can import the following file formats: You can export the following file formats: Note: iMovie does not work with clips that have a 16:9 aspect ratio. Important Do not unplug DV devices during import or export processes. Fonts supported The titling feature in iMovie supports TrueType, as well as Adobe PostScript, fonts. Capturing live video from a camcorder If you want to capture live video into iMovie from your DV camcorder, Apple recommends that you have a tape in your camcorder. To capture live video from a camera, follow these steps:
Note: If you have a tape in the camcorder and video is not playing through to iMovie, make sure the tape's write-protection tab is unlocked. 2. Make sure the camera's Demo mode is disabled. Some cameras switch to a Demo mode when left on Standby without a tape inserted. Check for a Demo function in your camcorder's settings menu and disable it. Important Capture video to projects on local hard disks. Do not capture video to projects saved on a server. Video cannot be reliably captured over a network to projects saved on a server. Renaming clip s You can rename clips within iMovie. However, do not change the names of clips in your project folder. This will break links to the media in your project file. Maximum movie and clip size The maximum length of a movie is limited only by the available disk space on your computer. There is no limit to the number of clips that can be combined to create a single movie. However, the maximum file size of an individual movie clip is 2 GB. If you exceed this 2 GB limit during an extended duration capture, iMovie will continue the capture into a second clip. Doing other work while rendering You can continue working in a project while rendering transitions or titles. Performance may decrease if you have more than two render processes running simultaneously. Emptying the Trash resets the Undo command If you empty the Trash in iMovie, you will not be able to undo any actions taken before emptying the Trash. About audio This version of iMovie fixes an audio problem that introduced distortion in loud audio levels coming from the camcorder. Changing the sound input device Do not change the sound input device while iMovie is running. iMovie uses an external or built-in microphone as the sound input device to record your voice. To change the sound input device, quit iMovie, then select the desired device in the Sound control panel or the Control Strip. Using the iMovie Tutorial Removing and reinstalling the tutorial project and media clips You can increase your hard disk space by removing the tutorial project and associated media clips. To do this, drag the iMovie Tutorial folder to the Trash in the Finder, then choose Empty Trash from the Special menu. To reinstall the Tutorial project, follow these steps:
2. If necessary, double-click the disc's icon to open it. 3. Double-click the Install iMovie icon and follow the onscreen instructions. 4. When the Custom Installation and Removal window appears, click the checkbox next to iMovie Tutorial (160 MB), so there's a checkmark in it. Leave the box labeled iMovie (20 MB) unchecked. 5. When you're finished, click OK. 6. After installation is complete, open the iMovie folder on your hard disk and drag the iMovie Tutorial folder onto the iMovie folder in the Applications folder. 7. Throw away the empty iMovie folder on the main level of your hard disk. Note: The iMovie Tutorial folder must be within the iMovie folder, alongside the iMovie application folder, for you to access the tutorial from the Help menu and to view the tutorial instructions in iMovie Help. Using PAL format video with the iMovie Tutorial iMovie supports the PAL video format. However, the media created for the tutorial is in NTSC format and cannot be exported to PAL-format DV devices. Hardware Compatibility Using DV devices iMovie will not work with more than one DV device connected to your computer via FireWire. Using additional storage devices iMovie requires hard disks with fast transfer and access rates. If you're using additional storage devices, make sure you use drives with a sustained transfer rate of 3.6 MB or higher. The following storage devices do not meet the minimum transfer rate or capacity requirements to work with iMovie: Tips for using certain camcorders Using Canon camcorders If you cannot pause the camcorder during rewind or fast-forward in iMovie, press the Stop button instead of the Pause button. Using Panasonic camcorders If you try to export to tape and the camcorder LCD flashes the message "Check DV Input," then goes into Record/Pause mode but doesn't start recording, do the following:
2. Add a few extra seconds of black before the recording, or increase the time to wait for the camcorder in the Export Movie window. 3. When you export to tape, watch for black frames being sent to the camcorder on the LCD then press the Still button on the camcorder's VTR controls to begin recording. Using the Sharp VL-PD3 If you attempt to export to tape and the camcorder goes into Record/Pause mode, but never actually starts recording, do the following:
2. Add a few extra seconds of black before the recording, or increase the time to wait for the camcorder in the Export Movie window. 3. When you export to tape, press the Play button on the camcorder's VTR controls to begin recording. Third-Party Software Using QDesign Music Codec 2 Professional Edition sound compression If you plan to use this sound compression software with iMovie, you must first export a movie through QuickTime Player using this codec and register the software with its serial number. You can then export movies with QDesign Music Codec 2 sound compression through the Expert export settings in iMovie. Solving Problems Video standard of the camcorder doesn't match the video standard of a project Before you create a project, connect the camcorder to your computer and turn the camcorder on. If you are using a PAL-format DV camcorder, iMovie will recognize the device and create the project in PAL format. Performance is slow or a message says memory is low A message says the device is too slow If you're using a FireWire storage device and a message says the device is to slow, you may need to update the device driver software. Go to the manufacturer's Web site and download the latest device driver. Install the driver software and restart your computer, then restart iMovie. For more information, contact the device's manufacturer. No video appears on the monitor when capturing video in Camera mode If you can control your camcorder within iMovie using Camera mode, but are not receiving any video on the computer's monitor while your camcorder is still on, disconnect the FireWire cable from the computer, then reconnect the cable. A discrepancy occurs between the playhead reading at the end of a clip and the clip's duration There is a one-frame difference between the duration of a clip and the playhead reading when the playhead is parked on the last frame. This is normal and will not affect your project. You can't export a movie to a PAL camcorder If you cannot record to your PAL camcorder, contact the manufacturer and check the specifications for your device. Certain PAL devices have FireWire (IEEE 1394) input disabled. Audio dropout happens in movies that are exported to tape If you experience audio dropout in a movie that you have exported to tape, return to your project and lower the volume level of the affected clip with the volume slider in the Audio Viewer. Then re-export your movie. You can't delete iMovie resource files If you experience trouble deleting iMovie resource files, do the following:
2. Choose Get Info from the File menu. 3. Make sure there is no checkmark in the Locked checkbox. 4. Drag the file to the Trash. 5. Choose Empty Trash from the Special menu. |
||||||
| Document Information | |
| Product Area: | Apple Software |
| Category: | iMovie |
| Sub Category: | General Topics |
| Keywords: | kaswu |
Copyright © 2000 Apple Computer, Inc. All rights reserved.