TOPIC The contents of this article are from a Read Me file included with Mac OS 9. DISCUSSION
Using the English Text-to-Speech Software Version 2.0
Installing the software To install the English text-to-speech software, follow these steps.
2. If you have been using an earlier version of text-to-speech software, see the note at the end of this section. 3. Double-click the Installer that's in the same folder as this document. 4. Click "Continue", then click "Install". The installation takes a few minutes. 5. When you see a message reporting that the installation was successful, click Restart. After the computer restarts, you can start using the text-to-speech software. Note for users of older English text-to-speech software. Installing English Text-to-Speech software version 2.0 may remove some or all of your older English Text-to-Speech voices. You can restore those voices by downloading an older version of the English Text-to-Speech software from http://www.apple.com/speech . However, only the voices that came with this version of the software have been tested and qualified by Apple on this Mac OS release. MacinTalk 2 and its associated voices (Ben, Boris, Brenda, Mariel, Marvin, Mr Hughes, Otis, Robovox, Votron, and Xero) are no longer supported. For a corresponding but more intelligible sound, we recommend trying Trinoids or Zarvox. Trying out the Text-to-Speech software. Follow these steps to try out text-to-speech software:
2. Click anywhere in the text to make sure nothing is selected. 3. Choose "Speak All" from the Sound menu. (If you cannot hear anything, you may have the sound turned all the way off. Check in the Sound control panel.) 4. If you want the computer to stop reading, choose Stop Speaking from the Sound menu. You can also try the following: Choosing the default voice. You can use the Speech control panel to use your favorite voice as the default voice for all your programs. To set the default voice, follow these steps.
2. Open the Speech control panel by double-clicking its icon in the Control Panels window. 3. Open the Options pop-up menu at the top of the Speech control panel and choose Voice. 4. To change the default voice, choose the voice you want from the Voice pop-up menu. To hear what the voice you chose sounds like, click the speaker button. 5. To change the rate at which the default voice speaks, move the Rate slider. 6. Close the control panel. Memory Constraints If there is not enough memory available to hold a voice, then this software will not speak. The voices with "high quality" in their names have the most natural and intelligible sound, but take up the most memory. To see the memory requirements of the voices, view their sizes in the Voices folder, which is in the Extensions folder. To see how much memory you have available, click the desktop and then select "About This Computer" in the Apple menu. Turning Talking Alerts on or off. You can use the Speech control panel to turn Talking Alerts on or off. When this feature is on, your computer will read aloud the contents of alerts. (An alert appears, for example, when your printer runs out of paper.) To turn on the Talking Alerts feature, follow these steps.
2. Open the Speech control panel by double-clicking its icon in the Control Panels window. 3. Open the Options pop-up menu at the top of the Speech control panel and choose Talking Alerts. 4. To have your Macintosh speak a phrase like "Alert!" or "Hey!" when an alert appears, click the "Speak the phrase" check box to select it, and choose the phrase you want to be spoken from the adjacent popup menu. 5. To have your Macintosh speak the content of an alert when one appears, click the "Speak the alert text" check box to select it. 6. To adjust how long your Macintosh waits after an alert appears before speaking the alert text, adjust the slider beneath the "Speak the alert text" check box. 7. To test how Talking Alerts will behave with your chosen settings, click the speaker icon to the right of the slider. To interrupt and cancel the computer's speaking, click the mouse or type a key. Tip: You can edit or add to the phrases spoken when alerts appear. To do this, select "Edit Phrase List in the popup menu adjacent to "Speak the phrase:" And for extra interest, if you select "Next in the list" (in the same popup menu), then each time an alert appears a different phrase from the list will be spoken. You can make sequences of phrases which work together, such as following "It's not my fault" with "It's still not my fault". How to annotate texts to improve intelligibility or add emotion You can use punctuation and embedded commands to improve how the synthesizer speaks text. For example, select the following two texts and compare how they are spoken by the "Victoria, high quality" voice. We recommend that you turn up your volume and close your eyes to make this comparison.
there are small computers that are difficult to use And then there's Macintosh. There are [[emph +]] big computers that are difficult to use, there are [[emph +]] small computers that are difficult to use. And then [[emph -]] there's: Macintosh! For more details about how to use these commands, search for "Speech" in Apple Help. Technical details The software that enables your computer to speak has these components: The Installer removes older versions of Apple's Text-to-Speech software that won't run properly under this Mac OS release. Troubleshooting (problems and solutions) My Macintosh won't speak.
The Installer program says there's a problem with the hard disk.
The Installer program displays other error messages.
I had an older version of text-to-speech software, then did a custom installation of the new software, but some of my older voices disappeared.
|
||||||
| Document Information | |
| Product Area: | Mac OS System Software |
| Category: | Mac OS 9.0 |
| Sub Category: | General OS Topics |
| Keywords: | kmos90 |
Copyright © 2000 Apple Computer, Inc. All rights reserved.