TITLE
    NeXTSTEP 3.3 Driver: Chips & Technologies Wingine
Article ID:
Created:
Modified: 		71775
3/3/99
3/3/99
TOPIC

    This document discusses a device driver for the NeXTSTEP operating system, version 3.3. This driver will not work with any version of OPENSTEP.

DISCUSSION

    Availability Information

    No updated versions of this driver are available

    Driver Name / Installer .pkg: Wingine
    Driver Type: Display
    Driver Scope: Generic-Chipset
    Supported Components: Brooktree Bt482 RAMDAC, C&T 64200 (Wingine), TI TLC34076 RAMDAC
    PC Bus / Interface Supported by Driver**: Integrated

    General Overview notes: This driver supports Wingine 64200 based display implementations.

    Supported Products / Add-on Adapters:


    Supported Products / Systems (ie integrated into PC System):
    Epson Wingine
    LGI Wingine

    Special Features of Driver / Driver Notes:


    Display Driver Details

    Supported Connectors: 15-pin High Density (VGA)
    Access Mode: Linear Framebuffer
    Adapter Memory: 2MB VRAM

    Display Modes (Number in () after resolution indicates frame buffer size required)

    32 Bit Color Modes**:


    16 Bit Color Modes**:
    1024x768 (2MB+), 1120x832 (2MB+)

    8 Bit Color / Greyscale Modes**:


    Known Problems



    Driver Version Notes

    ** - Indicates information that is inclusive of the entire capability of this driver. Not all devices supported by this driver may include all features listed. Check any available NeXTanswers and the hardware manual for the device for additional information.

    Product Vendor

Document Information
Product Area: Apple Software
Category: NeXTSTEP
Sub Category: Drivers
Keywords:

Copyright © 2000 Apple Computer, Inc. All rights reserved.