TOPIC This article discusses a device driver for the OPENSTEP Mach operating system, versions 4.0 through 4.2. DISCUSSION Driver: Weitek Power 9000 Last Update: December 18, 1997 Availability Information A version of this driver is on the OPENSTEP CD-ROM No updated versions of this driver are available Driver Name / Installer .pkg: WeitekP9000 Driver Type: Display Driver Scope: Generic-Chipset Supported Components: Weitek P9000 PC Bus / Interface Supported by Driver*: PCI, VL-Bus General Overview notes: This driver supports display implementations base on the Weitek P9000, such as the Diamond Viper. Supported Products / Add-on Adapters: Diamond Viper (PCI) Diamond Viper (VL-Bus) Genoa VideoBlitz 9200-VL (VL-Bus) - not tested, but should work Display Driver Details Supported Connectors: 15-pin High Density (VGA) Access Mode: Linear Framebuffer Adapter Memory: 1MB VRAM, 2MB VRAM Display Modes (Number in () after resolution indicates frame buffer size required) 32 Bit Color Modes*: 640x480 (2MB+), 800x600 (2MB+) 16 Bit Color Modes*: 1024x768 (2MB+), 1152x900 (2MB+), 800x600 (1MB+) 8 Bit Color / Greyscale Modes*: 1024x768 (1MB+), 1152x900 (1MB+), 1280x1024 (2MB+), 800x600 (1MB+) Known Problems If you get Weitek P9000 unable to reserve framebuffer address 0x80000000 and it boots up in standard VGA mode. Change the mapped memory address in the Configure.app to 0xA0000000. Driver Version Notes 4.00 - Released on OPENSTEP 4.0 User CD-ROM * - Indicates information that is inclusive of the entire capability of this driver. Not all devices supported by this driver may include all features listed. Product Vendor Diamond Computer Systems 1130 East Arquez Ave. Sunnyvale, CA 94086 USA +1 (408) 736 2000 international phone +1 (408) 730 5750 fax +1 (408) 730 1100 bbs 2400 baud +1 (408) 524 9301 bbs 9600+ baud WWW: http://www.diamondmm.com/ |
Document Information | |
Product Area: | Apple Software |
Category: | OPENSTEP |
Sub Category: | Drivers |
Keywords: |
Copyright © 2000 Apple Computer, Inc. All rights reserved.