TITLE
    System 7: MacPlot Driver Configuration
Article ID:
Created:
Modified: 		8005
8/15/91
8/27/99
TOPIC

    I cannot print to my Hewlett Packard plotter from MacDraw Pro. Why?

DISCUSSION

    The MacPlot driver for the Hewlett Packard plotter must be configured in a particular way under System 7. According to Microspot's technical support, this is the setup:

    1. Put the driver in the Extensions folder.
    2. Select the plotter in the Chooser.
    3. Pull the driver out of the Extensions folder to the top level of the System Folder.
    4. Configure the plotter through the Configure Application.
    5. Put the driver back into the Extensions folder.
    6. Make an alias of the driver and place it at the top level of the System Folder.


    The driver is bundled with MacDraw Pro and is also sold separately by Microspot. If the driver was bundled with a Claris product, please call Claris for technical support instead of Microspot.

    This article provides information about a non-Apple product. Apple Computer, Inc. is not responsible for its content. Please contact the vendor for additional information.

    The following Tech Info Library article can help you search for a particular vendor's address and phone number:

    Article 17159: " Locating Vendor Information "


Document Information
Product Area: Mac OS System Software
Category: System 7.0x-7.1.x
Sub Category: General Topics

Copyright © 2000 Apple Computer, Inc. All rights reserved.