TITLE
    Macintosh: Tandy 100 and 102 Connectivity
Article ID:
Author:
Created:
Modified: 		3852

5/31/89
6/17/92
TOPIC

DISCUSSION



    TOPIC -----------------------------------------------------------

    I need to connect a Macintosh to a Tandy Model 100 and to a Tandy Model 102
    portable computer for our work group.

    DISCUSSION ------------------------------------------------------

    Connecting a Macintosh computer to a Tandy Model 100 or Tandy Model 102
    portable computer requires a cable and communications software. Here are
    the pinouts for the cable:

    * Macintosh 128K, Macintosh 512K, and Macintosh 512Ke to Tandy Model 100
    and Tandy Model 102 cable:

    Macintosh (DB-9 male) Tandy (DB-25 male)
    --------------------- ------------------
    3 7
    5 3
    7 6, 8, and 20 (tied together)
    9 2
    4, 5 (tied together)

    * All other Macintosh models (from Macintosh Plus onward) to Tandy Model
    100 and Tandy Model 102 cable:

    Macintosh (Mini-Circular 8 male) Tandy (DB-25 male)
    -------------------------------- ------------------
    2 6, 8, and 20 (tied together)
    3 3
    4 7
    5 2
    4, 5 (tied together)

    Note: A Macintosh (DB-9)-to-ImageWriter I cable (Service Part #590-0169)
    properly connects a Macintosh 128K, Macintosh 512K, and Macintosh 512Ke to
    the Tandy Model 100 and Tandy Model 102 computers. The same cable connects
    the Macintosh Plus, Macintosh SE, and Macintosh II to the Tandy Model 100
    and Tandy Model 102 computers, if used in conjunction with the Macintosh
    Plus Peripheral Adapter Cable (Service Part #590-0341 or #590-0553).

    Using this custom cable and a terminal program for the Macintosh, you
    should be able to transfer files between the Tandy computers and the
    Macintosh with no difficulty. The Macintosh will think it's talking to an
    external modem; the terminal program will let you "talk" to the Tandy
    computers, or upload or download from the Tandy computer as if it were a
    mainframe. The Tandy, of course, uses its built-in TELCOM program in the
    TERM mode and can upload and download files, as if it were talking to a
    mainframe.

    The communication parameters must be the same at each end: baud rate, stop
    bits, XON/XOFF, and so on. A commonly used parameter for the Model 100 is
    77I1E for 4800 baud, 7-bit, Ignore parity, 1 stop bit, and XON/XOFF enabled
    (although you could choose other baud rates or other parameters).


EXTENDED Information section - Apple Internal Use - Service Providers and Support Professional

APPLE EYES ONLY Information section - Apple Need-To-Know Confidential

Article Change History:



Copyright © 2000 Apple Computer, Inc. All rights reserved.