TOPIC This Frequently Asked Questions (FAQ) document contains File Service related AppleShare IP 5.0 question and answers. The topics in this article are:
2. How does the AppleShare client know how to connect to the server using IP? 3. Does AppleShare IP 5.0 now support sharing volumes larger than 4GB? 4. Can I change the AppleShare server's port? I changed the PORT resources to a range of ports made available to me by the network administrator. When I try to log into the AppleShare server using the Chooser, a 'server not responding' message is displayed. 5. Will my Windows clients be able to use AFP over IP as well? 6. Other AppleShare IP 5.0 FAQ documents DISCUSSION
1. Question: Will the fastest network connection be selected between the client and AppleShare IP 5.0 server? Or will it always try TCP/IP when both TCP/IP and AppleTalk are available? Answer: The AppleShare IP 5.0 file server will default to an AFP over TCP/IP connection unless not available. This is considered the fastest connection. The client can force an AppleTalk connection by using the method described in the AppleShare IP 5.0 AppleShare Client FAQ . 2. Question: How does the AppleShare client know how to connect to the server using IP? Answer: The AppleShare IP 5.0 server sends its IP address to the client in an Appletalk packet when it's selected in the client's Chooser. The AppleShare client then knows to select the TCP/IP protocol for connection. 3. Question: Does AppleShare IP 5.0 now support sharing volumes larger than 4GB? Answer: Yes. When used in conjunction with AppleShare Client v3.7 from the Mac OS client, server volume sizes are read correctly up to 4 GB. If the volume is actually larger than 4 GB, the volume size information shown will reflect the remaining available disk space. For example, if the volume is 9GB and 5.5GB of disk space is used - the Mac OS client will see 3.5GB as available. In turn, if the volume is 10GB and 5.5GB of disk space is used - the Mac OS client will only see 4GB as available.
AppleShare Client prior to version 3.7 can only read up to 2GB for volume size. Same rule above applies for reading volume sizes.
1) Use the Chooser's "Server IP Address..." button to manually specify the IP address of the server, followed by a colon and the new port number.
2) Change the default AppleShare port number from the Mac OS client by altering the 'DATB' resource (ID=1407) to match that of the server's new AFP port number.
Note
: The client won't be able to connect to another AppleShare IP 5.0 server whose port number has not been altered, unless you manually connect using the Chooser's "Server IP Address..." button and explictly specify the port number after the "colon" notation.
|
Document Information | |
Product Area: | Apple Software; Communications-Networking |
Category: | AppleShare |
Sub Category: | AppleShare for Mac OS |
Copyright © 2000 Apple Computer, Inc. All rights reserved.